If this is not possible then you will be unable to use the filters below.
However, you can still page through the results.
Rather than replacing the whole hood, you can replace the lighting ballast separately, giving you a convenient solution to any lighting problems you may have.
Customer note: This ballast unit only powers one tube. Image is for illustration purposes.
With the ability to deliver extraordinary filtration and aeration, the Aquael Fan Filter is easy to use and is the ideal water cleaner, circulator and oxygenator.
Customer note: This unit comes with a 3 pin plug. Image is for illustration purposes.
The hood has provision for one fluorescent lamp. Also included is a hinged feeding hatch to make looking after your fish easy.
This disposable replacement cartridge filter comes with dacron floss and a foam pad for mechanical filtration, activated carbon and zeolites, to remove ammonia.
These precision made cartridges are made to fit the Clear Free filter, providing your tank with clean, healthy water for your fish to enjoy.
Designed to fit:
WWA2, WWA2M Neptune
CF1 Clear Free filter, Sponge Bob
NW10 New World habitat add-a-filter
WBK45, WBKS45, SBK1F Looney Tunes water-world kits
WBKT45 Tiki-world aquarium kits
SBK1 Series aquarium kits
With increased accuracy and product life, this Aquael Comfort Zone Gold Heater is a glass aquarium heater with a thermostat whose contacts are covered with a layer of gold.
Conventional glass heaters for aquariums basically consist of a thermostat, thermostat contacts, and a heating coil. The thermostat controls the water temperature in the tank and, when necessary, switches the heating coil on or off by connecting or disconnecting the contacts.
Thermostat contacts constitute the weakest link of this system. Although their operation is electronically assisted, metal oxidation gradually causes their surface to corrode. Corrosion shortens the useful life of the heater and decreases the precision of their operation.
Recommended size of aquarium: 15-55L
The Aquael Leddy Tube is a new power-saving lighting module for aquariums. It consumes up to 65% less power than Ecolight modules. This LED light combines high usability with ease of installation and versatility of use. This module consists of a technologically advanced 6 Watt light-emitting diode encased in a rounded glass tube, welded to the power cord.
The colour temperature of the light emitted by the LED is 6500 K. Thanks to its low weight, just 124g without the electrical cord, the Leddy Tube can be easily fitted into compatible aquarium lamps and lids. The European IPX8 airtightness standard ensures that tube the modules can be safely used in aquarium conditions.
Compatible with the Aquael Leddy 60 Aquarium.
The hood has provision for two fluorescent lamps. Also included is a hinged feeding hatch to make looking after your fish easy.