This pressure mounted Extra-Wide Wire Mesh Petgate is specially designed for large openings, and is the ideal way to keep pets from accessing an area.
Made from wood, in a natural finish, this affordable pet gate is easily, and securely, fixed using pressure mounts without the need for any fixings. The sturdy frame uses a toothed locking bar to secure it in position, and the panels are made from vinyl coated brown wire mesh. The side bumpers are a neutral colour, which helps to prevent marks on walls or door frames.
- Extendable
- No mounting fixings required
- Easy to use
This good looking pet gate is an easy to use solution to blocking off areas of your home, while still allowing you to see your pet through the mesh. As well as being a pet gate, this product can also be used as a child gate, so you can stop inquisitive fingers from going where they shouldn’t.
Details:
Location: Between rooms/hallways, extra-wide openings
Width: Adjusts to fit 75-127cm
Height: 81cm
Instructions:
1. Measure the width of the opening where your gate will be used.
2. While holding the gate with the locking bar toward you (numbers will be upright), lift the locking bar and slide the locking pin into the slot that matches the opening size.
3. Push down on the locking bar. This should put pressure on the four rubber bumpers holding the gate in place. If the gate is still loose in the opening, move the locking pin to the next slot until you get a good, solid fit in the opening. Do not force the locking bar down. This could put too much pressure on the gate, causing damage to your opening, the gate, or both. (The locking bar will have a slight bow. However, if the bow is large, ease off one slot, making sure it still has a good, solid hold in the opening).
4. To open the gate, simply pull up on the locking bar.
Customer note: This wooden product is not suitable for avid chewers. If your dog does chew, we would suggest a metal pet barrier.